Image - 2026-11-10 14:19

3D printable display pedestal for a chibi Identity V Composer figure, in the gothic Victorian style of the game. Compact round two-tier plinth, about 70 mm in diameter and 15 mm tall. LOWER TIER: wide and thick, with a side band of chunky embossed piano keys (alternating long white keys and short raised black keys) running all the way around. The lower edge has a beveled molding with a simple repeating Victorian motif. The rim is a thick twisted rope border, with small stitch-like cross seams across it that echo the stitched seams on the character's burgundy coat. UPPER TIER: slightly narrower and set back, finished with a thin gold-colored trim ring around the edge. On the front, a bold embossed treble clef inside a shallow round medallion, flanked by two small relief ornaments: curling acanthus leaves in a baroque style. A few thick sheet-music scrolls with chunky embossed notes curl over the rim at the back and sides, fused firmly to the plinth. A small relief tuning fork emblem sits on the opposite side. COLORS AND MATERIAL: deep burgundy red and charcoal black, with muted antique gold accents on the trim, clef and rope. Slightly worn aged marble and stone texture with subtle hairline cracks and soft chipping on the edges, in a moody, theatrical, mysterious manor atmosphere. TOP SURFACE: a completely flat, smooth, wide area with enough room for the figure's feet and the tuning fork tip. No holes and no raised elements on the standing area. PRINT REQUIREMENTS: solid watertight mesh, clean closed surfaces, completely flat bottom, no floating parts, no overhangs that need supports, minimum feature thickness 2 mm, relief depth 1–1.5 mm, thick rounded shapes with beveled edges, no thin fragile elements, compact and stable. Pedestal only, no character included, plain background.